Roofing

Roofing

Konnect Fastening Systems provide high quality roofing supplies to some of New Zealand's leading roofing and construction companies.

We offer a quality, tried and tested Self-Drilling Roofing Screws and Cladding Screw range which is manufactured to meet or exceed the specifications of Australian Standards AS/NZS3566.1-2002 (R2015) and AS/NZS3566.2-2002 and is suitable for both the residential and commercial markets as well as the transportable market.

To support this, we offer a solid product range covering everything a roofer could need, from sealants, hammers, silicones and construction adhesives to measuring tapes and essential safety & PPE.

Not quite sure what the right roofing & cladding supplies are for you? All our branches are equipped to supply products straight off the shelf or you can call our experts directly on 0508 KONNECT (NZ).

Unitite

Hex Washer Head Screw With EPMD Seal

A multi-purpose fastener that is suitable for fixing roofing and cladding to timber, steel purlins or metal battens. For
 
For fixing corrugated and trapezoidal roofing of 32mm profile height into timber and into steel between 18–50mm.*
 
Top thread allows roofing sheets to be pulled tight against the neo resulting in waterproof seal, shank cutters oversize pilot hole through roof sheet, de-burs "pig tails" created when drilling on an angle, cuts a clean hole through roofing sheets. Reverse thread on shank relieves thread forming stress when drilling through steel.
 
  • Class 5 Galvanised
  • Available in various colours

 

 photo

Techinal Data
 
Specification Unit 1.6mm Steel
Axial Withdrawal Force kN 4.32
Axial Tensile Strength kN 16.74
Single Shear Load kN 11.85
Drilling and Threading Capacity kN 2.00

 

  • Thicker gauge under the head
    The 12 gauge main body of the screw allows for easy installation into timber or steel, while under the head the 14 gauge thread grips the sheeting and decreases the possibility of water entry.
  • New 12G thermoset seal*
    The new thicker, 12 gauge thermoset seal encapsulates under the head of the fastener and reduces splitting, bulging or leaking in occasions of overdriving.* Not to be used in conjunction with Metal Profile Washers and in thermal expansion situations.        

All of our branches are equipped to supply products straight off the shelf, so whether you are planning for a big project or simply need some last minute supplies to get you through your current project, contact your local Konnect® branch today.